Svenska
Dansk
Suomi
Español
Deutsch
Français
Italiano
Nederlands
Polskie
Cart
Your cart is empty, but doesn't have to be..
Your cart is empty, but doesn't have to be..
Victron Energy PIN482601000, The RS Smart Solar inverter is a combination of a powerful 48 VDC, 6 kVA and 230 VAC inverter and a 80-450 VDC 4 kW high voltage MPPT solar charger . Thanks to its modern design and high frequency technology, the inverter weighs only 11 kg and has an excellent performance, low consumption in idle mode and is very quiet in operation.
The inverter is equipped with a screen to read data for battery, inverter and solar charger. These parameters can also be read via Bluetooth with the VictronConnect app. In addition, the inverter has a VE.Can port for connection to a GX unit for system monitoring and a VE.Direct port for connection to a GlobalLink 520.
Off-grid solar inverter >
The inverter RS Smart Solar 48/6000 is a 48 V 6 kVA inverter with a solar cell input of 450 VDC 4 kWp. It is used on off-grid solar devices that require AC power.
A combination of an inverter, bi-directional DC-DC converter and MPPT.
The inverter produces a perfect sine wave and can supply devices with high current requirements. It comes with a bi-directional DC-DC converter that can either charge the battery when there is excess solar power or convert it from the battery when needed.
Wide MPPT voltage range< br>80 – 450 VDC, with a solar cell voltage at start of 120 VDC.
Lightweight, efficient and silent
Thanks to high frequency technology and a new design, it weighs here the powerful inverter only 11 kg. It is also incredibly efficient, draws little power in standby mode and is very quiet in operation.
Display and Bluetooth
The display shows parameters for the battery, inverter and controller for solar charger. The same parameters can be accessed with a smartphone or other Bluetooth-enabled device. Bluetooth can also be used to set up the system and change settings with VictronConnect.
VE.Can and VE.Direct port
For connection to a GX unit for system monitoring , data logging and remote firmware update.
Built-in solar cell isolator
Both parallel solar cell rows connected to the MC4 connectors can be safely isolated with the large built-in switch at the far end down on the device.
Input/output connections
Connection of programmable relay, temperature sensor and voltage sensor. The remote input can also be configured to accept Victron smallBMS.
Good product related links:
