Trustpilot

Maretron - MPower CLMD16-R, 16 channel DC power module, incl. cabling 30cm
  • 27,777.38 NOK
  • 27,221.62 NOK
Lowest price at PriceRunner

MARETRON MPower CLMD16-R, is a 16-channel DC power module designed for larger loads and more circuits.

Share
Article number: CLMD16-R
EAN: 873804004365
Manufacturer: Maretron

MARETRON MPower CLMD16-R, is a 16-channel DC power module designed for larger loads and more circuits. Four of the 16 switches can handle a maximum current of 25 amperes, and twelve switches can handle a maximum current of 12 amperes, with a total current capacity of 125 amperes. In addition, circuits can be paralleled.

The CLMD16 also supports two 12A H-Bridge circuits for polarity switching, which can be used for loads such as engine hatches, gangways, trim tabs, and more. The module has 8 inputs for wired switches that can be used to switch switch states or as inputs for other data, such as bilge pump alarms or hatch positions, and more. There are also 2 resistive inputs and 1 current loop input that can be used for various applications, including level monitoring in tanks.

The CLMD16 handles many types of DC loads, such as lights, pumps, motors, and electronics. An additional advantage of the CLMD16 is that it reports the current through each of the 16 switches. This makes it possible to determine if the loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and undercurrent conditions.

Supplied with cabling A3708, A3709, A3710.

Features

  • NMEA 2000 interface
  • IP67-rated
  • Ignition protected
  • Opto-isolated from NMEA 2000 to eliminate potential ground loops
  • 16 Electronic Circuit Breakers (ECB) for ON/OFF control via the NMEA 2000 network
  • 12 dimmable switches
  • 12 switches handle a maximum of 12 amperes, and 4 switches handle up to 25 amperes
  • Selected switches can be paralleled for larger loads
  • 2 sets of 12-ampere switches can be combined for reverse motor control
  • Individual monitoring of electrical current for each switch
  • Switches can be preset to power state at startup (ON, OFF, or LAST STATE)
  • Switches can be locked to prevent accidental activation
  • Capacitive push buttons for local control of all loads
  • All inputs and outputs protected against short circuit to power or ground
  • Automatic shutdown of ECB on overcurrent
  • Automatic thermal shutdown of ECB (overheat protection)
  • Automatic thermal shutdown for ECB (overtemperature protection)

Good product-related links: