Svenska
Dansk
Suomi
Español
Deutsch
Français
Italiano
Nederlands
Polskie
Norsk
Cart
Your cart is empty, but doesn't have to be..
Discount: 0.00 NOK
VICTRON ENERGY SDTG2400801, SKYLLA-TG is a series of battery chargers with two full-power outputs and one 4 A output. The charging voltage can be precisely adapted to any battery system. The charger is powered by 230 V at 50/60 Hz. The charging voltage can be measured directly at the battery terminals to compensate for voltage drop in the cables. An external sensor allows measurement of the battery temperature and compensates the charging voltage accordingly.
Available in 24V or 48V, 1-phase or 3-phase versions.
Perfect battery chargers for all types of batteries
The charging voltage can be adapted to all battery models, open or sealed. Especially for sealed maintenance-free batteries, a stable charging voltage is very important to ensure a long service life. Overvoltage leads to too much gassing and dehydration - the battery stops working.
Controlled charging
Each TG charger has a microprocessor that regulates charging very precisely in three stages. The charging process follows IUoUo characteristics and charges faster than other processes.
Can be used as a power supply unit
Due to the perfectly stabilized output voltage, a TG charger can be used as a power supply unit when batteries or buffer capacitors are not available.
Two outputs for 2 battery groups (24 V models only)
The TG charger has two mutually isolated outputs. The second output, intended for charging the starter battery, is limited to approximately 4 A and has a slightly lower output voltage - it is intended for trickle charging.
Increased battery life: temperature compensation
A temperature sensor is included with all Skylla TG chargers. The temperature sensor lowers the charging voltage when the battery temperature rises. This function is very important for sealed batteries, which could otherwise dry out due to overcharging.
Battery voltage sensing
To compensate for the voltage drop in the battery cables, the TG charger is equipped with a separate voltage sensor that is connected directly to the battery so that the battery always receives the correct charging voltage.
Good product-related links:
