Your cart is empty, but doesn't have to be..
VICTRON ENERGY BPC240842002, is a Blue Smart IP22 is a new professional battery charger with built-in Bluetooth at 24V/8A and 1 output.
VICTRON ENERGY BPC240842002, the Blue Smart IP22 is a new professional battery charger with built-in Bluetooth, 24V/8A and 1 output. The Blue Smart IP22 can be used on devices in your workshop and on motor vehicles such as (classic) cars, motorcycles, boats, caravans and motorhomes. The seven-step charging algorithm gets the most out of your battery. The charger provides the battery with the current it needs, maintains its health and ensures better performance and longer life. Unlike other brands, the Blue Smart IP22 charger attempts to recharge completely discharged batteries by forcing low current into them. Normal charging then resumes as soon as the battery terminals have sufficient voltage.
The Blue Smart IP22 charger is equipped with built-in Bluetooth and you can check the status of the charger and battery via a smartphone, tablet or laptop. All charger settings can be made with the VictronConnect app.
Bluetooth Smart
The wireless solution for monitoring voltage and current, for changing settings and for updating the charger when new functions become available.
High efficiency
With 94% efficiency, these chargers generate up to four times less heat compared to the Industry standard, and once the battery is fully charged, power consumption is reduced to 0.5 watts, about five to ten times better than the Industry standard.
Adaptive 6-step charging algorithm: Test - bulk - absorption - reconditioning - float - storage.
The Blue Smart charger is equipped with a microprocessor-controlled adaptive battery management. The adaptive function will automatically optimize the process in relation to the way the battery is used.
Fully programmable charging algorithm
The absorption, float and storage voltages as well as the reconditioning setting and temperature compensation value can be programmed with the Bluetooth app. After activating expert mode, it is possible to change virtually all parameters and time limits used by the charging algorithm with the app.
Storage mode: less maintenance and aging when the battery is not in use
Storage mode is always activated when the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for 12 V batteries) to minimize gassing and corrosion of the positive electrode plates. Once a week, the voltage is raised back to the absorption level to 'equalize' the battery. This function prevents deposits of electrolyte and sulfate, one of the main causes of premature battery failure.
Also charges lithium-ion batteries
Lithium-ion batteries are charged with a simple bulk - absorption - float algorithm.
Recovery function for completely discharged batteries
Starts charging even when the battery has been discharged to zero volts. Recovers a completely discharged lithium-ion battery with an internal disconnection function.
NIGHT and LOW setting
In NIGHT or LOW setting mode, the output current is reduced to max. 50% of normal output power and the charger becomes completely silent. The NIGHT setting automatically ends after 8 hours. The LOW setting can be ended manually.
Protected against overheating.
The output current is reduced when the temperature increases up to 50 °C, but the Blue Smart charger is not affected.
Eleven LEDs for status indication
Charging algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. Mode setting button: NORMAL (14.4 V) / HIGH (14.7 V) / RECONDITION / LI-ION.
History log with 40 cycles
The history screen contains historical data from the charger's entire lifetime and detailed statistics from the last 40 charging cycles.
VE.Smart Networking
VE.Smart Network is a wireless device-to-device (D2D) communication network between Victron products, using Bluetooth Smart.
Optional battery voltage and temperature compensation and current control
VE.Smart Network opens up the possibility of optimizing the charging process: a Smart Battery Sense, Smart
Battery Monitor or a Smartshunt, can be used to communicate battery voltage and temperature to one
or more battery chargers. A Smart Battery Monitor or Smartshunt also communicates battery current.
Synchronized parallel charging
Synchronize up to ten battery chargers in a VE.Smart Network to make them charge a battery as if they were
one large charger. The chargers synchronize the charging algorithm between them. They switch simultaneously from one charging mode
to another, for example from bulk to absorption.
Synchronized parallel charging has several interesting advantages:
Good product-related links:
Svenska
Dansk
Suomi
Español
Deutsch
Français
Italiano
Nederlands
Polskie
Norsk
