Svenska
Dansk
Suomi
Español
Deutsch
Français
Italiano
Nederlands
Polskie
Norsk
Cart
Your cart is empty, but doesn't have to be..
Your cart is empty, but doesn't have to be..
VICTRON ENERGY QUA243020010, is a combined inverter and charger QUATTRO with 12/3000/120-50/150 and VE.Bus. It can also accept two AC inputs and automatically connects to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, and several system-integrating functions such as three-phase or split-phase operation and parallel operation. The series includes several models with different voltages and power ratings.
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, such as the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.
Two AC outputs
The main output has an uninterruptible function. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so quickly (within less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second power source is live only when AC is available in one of the inputs from the Quattro. Loads that should not discharge the battery, such as a water heater, can be connected to this output.
Split-phase option
A split-phase AC source can be obtained by connecting our autotransformer (see datasheet on victronenergy.com) to a "European" inverter programmed to provide 240 V/60 Hz.
Three-phase capability
Three units can be configured for three-phase output. But that's not all: up to four sets of three 15 kVa units can be paralleled to provide 144 kW/180 kVA output power and more than 2400 A charging capacity. PowerControl - managing limited generator power, shore power, or grid power. The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or from the shore connection (16 A per 5 kVA Quattro at 230 VAC). A current limit can be set for each AC input. The Quattro will then take into account other AC loads and use any extra current for charging, preventing the generator or shore power from being overloaded.
PowerControl - managing limited generator power, shore power, or grid power.
The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or from the shore connection (16 A per 5 kVA Quattro at 230 VAC). A current limit can be set for each AC input. The Quattro will then take into account other AC loads and use any extra current for charging, preventing the generator or shore power from being overloaded.
PowerAssist - enhanced capacity for shore or generator power
This function takes the principle of PowerControl to a new dimension and allows the Quattro to support the capacity of the alternative source. Since peak power is often only required for a limited period, the Quattro will ensure that insufficient shore or generator power is immediately compensated with power from the battery. When the load decreases, the excess current is used to recharge the battery.
Solar energy: AC power is available even during grid failure
The Quattro can be used without grid power, as well as with grid-connected PV and other alternative energy systems. Software for grid loss detection is available.
System configuration
On-site monitoring and control
Several options are available: Battery Monitor, Multi Control panel, Color Control GX and other GX devices, smartphone or tablet (Bluetooth Smart), laptop or desktop computer (USB or RS232).
Remote monitoring and control
Color Control GX and other GX devices. Data can be stored and displayed on our remote control website VRM (Victron Remote Management), which is also free.
Remote configuration
When connected to Ethernet, systems with a Color Control GX and other GX devices can be accessed and settings can be changed.
Good product-related links:
