Victron Energy - MultiPlus 48/5000/70-100 230V VE.Bus

  • 1,787.72 EUR
  • 1,751.93 EUR
Lowest price at PriceRunner

VICTRON ENERGY PMP485021010, MultiPlus is a combined inverter and charger in one elegant package.

Share
Article number: PMP485021010
EAN: 8719076047919
Supplier: Victron Energy

VICTRON ENERGY PMP485021010, MultiPlus is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology as well as numerous system integration features.

Two AC outputs
The main output has an uninterrupted function. MultiPlus takes over the supply to the connected loads in the event of a mains failure or when the shore/generator power is disconnected. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to function without interruption. The second output is only live when AC power is available on one of the inputs of the MultiPlus. Loads that should not discharge the battery, such as a water heater, can be connected to this output (a second output is only available for models with a capacity of 3 kVA or more).

Basically unlimited current thanks to parallel operation
Up to 6 Multis can work in parallel to achieve higher output power. Six units 24/5000/120, for example, will provide 25kW / 30kVA output power and 720 A charging capacity.

Three-phase capacity
In addition to parallel connection, three units of the same model can be configured for three-phase output. But that's not all: up to 6 sets of three units can be connected in parallel for a large inverter of 75 kW / 90 kVA and a charging capacity of more than 2,000 A.

PowerControl - Managing limited generator, shore or mains power
MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore supply (nearly 10 A per 5 kVa Multi at 230 VAC). With the Multi Control Panel you can set a maximum generator or shore current. MultiPlus will then take into account other AC loads and use any extra power for charging, preventing the generator or shore power from being overloaded.

PowerAssist - Boost capacity for shore or generator power< br>This function takes the principle of PowerControl to a new dimension. It allows MultiPlus to expand the capacity of the alternate source. As peak power is often only required for a limited period, MultiPlus will ensure that insufficient shore or generator power is immediately compensated with power from the battery. When the load decreases, the excess current is used to recharge the battery.

Solar energy: AC power is available even in case of mains failure
MultiPlus can be used without mains power, as well as with grid-connected PV and other alternative energy systems. A network loss detection software is available.

System Configuration

  • If it is a stand-alone device where settings need to be changed, this can done in a few minutes
    with a new DIP switch setting procedure.
  • Parallel and three-phase devices can be configured with the software VE.Bus Quick Configure and VE-Bus System
    Configurator.
  • Off-grid, grid-interactive and self-consumption devices, including grid-tied inverters
    and/or MPPT solar chargers, can be configured with assistants (dedicated software for specific
    applications).

Monitoring and control on site
Several options are available: Battery monitor, Multi Control panel, Color Control GX and other GX devices, smartphone or tablet (Bluetooth Smart), portable or desktop computer (USB or RS232).

Remote monitoring and control
Color Control GX and other GX units. Data can be stored and displayed on our VRM (Victron Remote Management) web page, which is also free.

Remote Configuration
When connected to Ethernet, systems with a Color Control GX and other GX devices are accessed and settings can be changed.

< iframe width="640" height="360" src="//www.youtube.com/embed/mEN15Z_S4kE?wmode=opaque" frameborder="0" allowfullscreen="">


Good product related links: