Trustpilot

Victron Energy - BlueSolar PWM LCD&USB 48V-30A, without BT

  • 90.27 EUR
  • 84.02 EUR
Lowest price at PriceRunner

VICTRON ENERGY SCC040030050, is an affordable PWM solar controller for two separate batteries.

The product is unfortunately out of stock.

Share
Item number: SCC040030050
EAN: 723193839942
Supplier: Victron Energy

VICTRON ENERGY SCC040030050, is an affordable PWM solar controller for two separate batteries.

LCD screen
For status monitoring and setting

p>

Load output
Excessive discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the load when the battery has discharged to a preset voltage. Some loads (especially inverters) are best connected directly to the battery and the remote control of the inverter connected to the power output. A special interface cable may be required, refer to the manual. The connection and disconnection voltages are adjustable.

Day/night timer on the load output
This option gives you the option to preset a start time after dawn.

< p>Programmable battery charging algorithm
Pre-programmed algorithms for AGM, GEL, wet cell or LiFePO4 batteries (with internal BMS only)

Two 5-volt USB outputs
Max current (both outputs together): 2 A

Functions

  • 12V/24V.
  • Charges two separate batteries (for example the starter battery and consumption battery)< /li>
  • Programmable charging current ratio (default setting: same current to both batteries)
  • Charging current settings for three battery types (Gel, AGM and liquid filled)
  • Internal temperature sensor and remote temperature sensor (optional)
  • Protected against overcurrent
  • Protected against short circuit
  • Protected against reverse polarity when connected to solar panels and/or battery


Good product related links: