Trustpilot

Victron Energy - BlueSolar PWM LCD&USB 48V-20A, without BT

  • 80.73 EUR
  • 79.12 EUR
Lowest price at PriceRunner

VICTRON ENERGY SCC040020050, is an affordable PWM solar controller for two separate batteries.

Share
Article number: SCC040020050
EAN: 8719076046240
Supplier: Victron Energy

VICTRON ENERGY SCC040020050, is an affordable PWM solar controller for two separate batteries.

LCD screen
For status monitoring and setting

p>

Load output
Excessive discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the load when the battery has discharged to a preset voltage. Some loads (especially inverters) are best connected directly to the battery and the remote control of the inverter connected to the power output. A special interface cable may be required, refer to the manual. The voltages for connection and disconnection are adjustable.

Day/night timer on the load output
This option gives you the possibility to preset a start time after dawn.

Programmable battery charging algorithm
Pre-programmed algorithms for AGM, GEL, wet cell or LiFePO4 batteries (with internal BMS only)

< strong>Two 5-volt USB outputs
Maximum current (both outputs together): 2 A

Functions

  • 12V/24V.
  • Charges two separate batteries (for example the starter battery and consumable battery)
  • Programmable charging current ratio (default setting: same current to both batteries)
  • Charging current settings for three battery types (Gel, AGM and liquid-filled)
  • Internal temperature sensor and remote temperature sensor (optional)
  • Protected against overcurrent
  • Protected against short circuit
  • Protection against reverse polarity when connecting to solar panels and/or battery


Good product related links: