Trustpilot

Victron Energy - BlueSolar PWM LCD&USB 48V-10A, without BT

  • 65.97 EUR
  • 61.63 EUR
Lowest price at PriceRunner

VICTRON ENERGY SCC040020050, is an affordable PWM solar controller for two separate batteries.

The product is unfortunately out of stock.

Share
Item number: SCC040010050
EAN: 8719076036944
Supplier: Victron Energy

NOTE - BlueSolar is without BT and if you want it with BT, you should look at SmartSolar instead!

VICTRON ENERGY SCC040010050, is an affordable PWM solar controller for two separate batteries.

LCD screen
For status monitoring and setting

Load output
Excessive discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the load when the battery has discharged to a preset voltage. Some loads (especially inverters) are best connected directly to the battery and the remote control of the inverter connected to the power output. A special interface cable may be required, refer to the manual. The connection and disconnection voltages are adjustable.

Day/night timer on the load output
This option gives you the option to preset a start time after dawn.

< p>Programmable battery charging algorithm
Pre-programmed algorithms for AGM, GEL, wet cell or LiFePO4 batteries (with internal BMS only)

Two 5-volt USB outputs
Maximum current (both outputs together): 2 A

Functions

  • 12V/24V.
  • Charges two separate batteries (for example the starter battery and consumable battery)
  • Programmable charging current ratio (default setting: same current to both batteries)
  • Charging current settings for three battery types (Gel, AGM and liquid-filled)
  • Internal temperature sensor and remote temperature sensor (optional)
  • Protected against overcurrent
  • Protected against short circuit
  • Protected against reverse polarity when connected to solar panels and/or battery


Good product related links: