Egis - Battery switch XD Single 500A, 12/24V, remote-controlled, NMEA 2000

~~234,90 €~~
230,13 €

Remote-controlled 500A electric battery switch from EGIS with NMEA 2000 connection. Waterproof 12V/24V model in the XD series for the boat's electrical system.

Article number: 9811-4500B-EG

Manufacturer: EGIS

Information
Reviews

Egis XD Single 500A is a remote-controlled 500A electric battery switch with NMEA 2000 connection for marine electrical systems. The unit is waterproof and has automatic voltage sensing for both 12V and 24V systems. Switching on and off can be controlled via NMEA 2000 sentences from a compatible multifunction display or via an analogue positive/negative signal. The switch reports voltage as well as operating and position status back to the network, and can also be operated manually with an integrated knob.

Features

Automatic sensing for 12V and 24V electrical systems
Remote control via NMEA 2000 network
Remote control via analogue positive/negative signal
Three-position knob for manual on, off and locking
Sends voltage and status information via NMEA 2000
Local LED indication and output for an external indicator LED
Configuration of NMEA 2000 sentences via DIP switches on the unit
Low standby power consumption of 15mA
Sealed, waterproof construction with stainless steel hardware

Technical specifications

Type: Single XD relay with knob
Continuous current: 225A (2/0 AWG), 300A (4/0 AWG), 500A (2 x 4/0 AWG)
Peak current 30 seconds: 1000A, 1100A and 1600A respectively
Breaking under load: 300A at 12V, 150A at 24V (50,000 cycles)
Voltage range: 8-36V DC, automatic sensing
Mechanical life: 1,000,000 cycles
Operating temperature: -40 to +105 °C
Water resistance: IP67 / IP6K9K
Studs: M10 stainless steel, 13.6 Nm
Ignition protected: SAE J1171 / ISO 8846
NMEA 2000: M12 male, LEN 1
Control connector: 4-pin DT (DT06-4S)

Compatibility

The system is compatible with NMEA 2000 networks, multifunction displays (MFD) and control equipment that support standard NMEA 2000 messages for relay control

Installation and use

The unit is used for remote and manual switching of the main power in the boat's electrical system. Network parameters and relay functions are programmed using DIP switches located under the protective cover.