Yacht Devices - Tank Level Adapter, NMEA 2000, converts analog resistive signals

~~211.74 GBP~~
202.98 GBP

YACHT DEVICES YDTA-01, is a tank adapter that converts data from existing resistive level sensors to NMEA 2000 so that the tanks can be displayed on an NMEA 200

Article number: YDTA-01N

EAN: 4779045210434

Manufacturer: Yacht Devices

Information
Reviews

YACHT DEVICES YDTA-01, is a tank adapter that converts data from existing resistive level sensors to NMEA 2000 so that tanks can be displayed on an NMEA 2000 screen or plotter. The adapter can be programmed to transmit one of these seven tank values available for NMEA 2000: diesel, gasoline, oil, fresh water, black water or livewell. The tank number can also be programmed: up to 16 tank types are allowed in an NMEA 2000 network. The YDTA-01 can be used with European sensors (10 to 180 ohm), American sensors (240 to 33 ohm), Japanese sensors (0 to 310 ohm) or other non-standard sensors with resistance less than 400 ohm. The YDTA-01 can be installed as a standalone unit, together with an existing instrument (1- and 2-coil gauges supported), or together with a Volvo Penta engine interface box (MDI). If you have a combined gauge where you press a button to display values, it also works.

The tank sensors can be calibrated with 12 points to provide accurate values for tanks with irregular shapes. Extra resistance in the sensor cabling can be compensated in the settings. The YDTA-01 has a MicroSD card slot used for configuration, updating, diagnostics, and data recording. No special program is needed. You only need a device (computer or mobile) with a MicroSD reader and a simple text editor. The YDTA-01 can store tank data on a MicroSD card, but it is also possible to record more than a Voyage Recorder to store data from the entire network. It is possible to use a Wifi adapter to view all tanks in a web browser. The YDTA-01 can also be configured with a special command in the installation description field, which can be accessed from most modern 2000 plotters or displays. This can also be accessed via the CAN Log Viewer program through a USB or Wifi adapter and a computer.

Features

Equipped with an NMEA 2000 micro male or Raymarine SeaTalk NG connector
Can be installed separately or together with an existing gauge (1-coil or 2-coil gauges supported)
Can be installed in parallel with Volvo Penta MDI (D1 and D2 engines)
Works perfectly with a combined instrument where you have to press a button to see the value
Sensor values can be calibrated with a 12-point calibration
Has a MicroSD card slot for configuration, logging, and software updates
Can record tank values on a MicroSD card
High galvanic isolation between NMEA 2000 and the sensor

The YDTA-01 is available in two versions: