Cart
Discount: 0.00 EUR
Discount: 0.00 EUR
Veratron OceanLink 7 inch TFT display for monitoring engine data and navigation. With NMEA 2000, J1939, analogue inputs, video and EasyLink.
Veratron OceanLink displays are made for monitoring engine data from single or twin installations and for showing navigation data. The bright (800 cd) screen is optically bonded, with durable mineral glass, and made with IPS technology. The screen is very rugged, rated IPX7 and can be used at -20 to +70 °C.
The screen has four push buttons and three touch buttons for easy scrolling through the display modes. Thanks to analogue inputs, J1939 and NMEA 2000, the screen can show engine data from virtually any engine on the market. The screen converts data from analogue signals or J1939 to NMEA 2000 and also acts as a master, which means satellite instruments can be connected via EasyLink.
The screen is flush mounted in a panel and fixed with four screws under the bezel, and on the back there are connections for NMEA 2000, EasyLink, analogue inputs, J1939 and video. With twin engines, each engine is connected to its own input. The screen can also control a MediaBox (radio/USB/Bluetooth streaming) connected via NMEA 2000.
Calibration can be done for all sensors between 0-400 Ω.
An alarm can be set for each analogue sensor. An external buzzer can be activated when the alarm is active. The alarm is also sent to the NMEA 2000 network. If the alarm is activated, it can be paused with a button or from another OceanLink unit on the network. Alarms can also be received from J1939 and from NMEA 2000. There is also an input for external signals, e.g. a level sensor, door or similar.