Actisense NDC-4 - NMEA multiplexer, 4 inputs, 2 serial outputs

~~3,551.30 NOK~~
3,408.60 NOK

ACTISENSE NDC-4, is an NMEA multiplexer, 4 inputs, 2 serial outputs. Flexible and powerful enough to be the heart of a simple system.

The product is unfortunately out of stock.

Article number: NDC-4

EAN: -

Manufacturer: Actisense

Information
Reviews

ACTISENSE NDC-4, is an NMEA multiplexer, 4 inputs, 2 serial outputs. Flexible and powerful enough to be the heart of a simple system, or one of many Actisense products in a more complex system.

The Actisense NDC-4 allows up to five NMEA 0183 sources to be multiplexed into a single stream. Two flexible ISO-Drive outputs allow two different downstream talker baud rates to be created, ensuring maximum system flexibility. It provides full access to all NMEA 0183 data sources, configurable filters to remove unwanted data using the NDC Control Center, allowing an onboard computer to read and add to the combined data stream. Factory pre-configured versions allow the NDC-4 to be used out of the box for AIS operation (NDC-4-AIS). An "autoswitch" option is also available (NDC-4-ASW) to provide redundancy options to your NMEA 0183 network.

Specifications

Supply (“BATT”)
Voltage		8-35 V
Current		40 mA max @ 12V DC under no load
Supply (USB)
Supply voltage		4.75-5.25 V
Supply current from USB (see note 1)		75 mA max
Opto-isolated Flexible Input
Input voltage between +/-	Logical ‘1’/stop bit	-15-0.5 V
	Logical ‘0’/start bit	4-15 V
Input current	Maximum is under +35v overload condition, Min @ 2.0v input level	1.6-9 mA
Differential input voltage	Required level for NMEA to be detected	1.8-2 V
Galvanic isolation	Between input & output	2500 V
Overdrive protection		40 V
Input Baud rate (ports 0 & 1 + USB)	Configurable Baud rate	4800-115200 bps
Input Baud rate (ports 2 & 3)	Configurable Baud rate	4800-57600 bps
Input Baud rate (port 4)	Fixed Baud rate	4800 bps
ISO-Drive Flexible Output
Output voltage between ISO Out +/A and ISO Out -/B (under no load)	Logical ‘1’	-4.6 to -5 V
	Logical ‘0’	4.6-5 V
Output current at max load of 100 ohm	At maximum load, differential drive voltage reduces to 2.1v	21 mA
Output short circuit current (note 2)	Due to short circuit protection	50-55 mA
Galvanic isolation	From Opto input and (USB) ground	1500 V
Output Baud rate (ports 0 & 1 + USB)	Configurable Baud rate	4800-115200 bps
Data propagation delay	Under no-overload conditions	1-100 ms
General
Ambient temperature		-20-70 °C
Guarantee	Extended Actisense guarantee	3 Year
Gland clamping range	Cable diameters accommodated	4.5-10 mm
IP Rating		IP66